Logo
收藏本站 | 留言反馈
客服热线:400-060-1557
邢台市乐众机械制造有限公司专业生产各种砂浆喷涂机,了解最新砂浆喷涂机价格、细石混凝土输送泵视频请致电:18231930999
311快速喷涂机 您的位置:首页- 产品展示 - 砂浆喷涂机
311快速喷涂机 点击查看原图

311快速喷涂机

浏览次数: 次 更新日期:13-10-08

产品详细介绍:

 

 

 

 

 

砂浆喷涂机具体的操作规则:

   1、开机前先加清水进料斗,将转速调整至中高速,以便达到运行湿润管道的效果。
  2、将搅拌均匀的材料放进料斗,再将管道和喷嘴与主机喷浆出口锁紧。
  3、开喷前,先将凤泵冲气至6kg压力(匹配凤泵机0.26-0.36m)然后接上喷嘴。
  4、接通电源,把枪口对准料斗,调整风压量和速度快慢,以达到最佳的雾化状态为止,停机不停风。
  5、当调试准确后,立即将喷嘴和喷喉移至施工现场工作。
  6、施工过程中,管道内充满涂料,不适合停机过长时间,如果停电,应立即拆管道清洗。
  7、如果管内充压时,拆管清洗前,必须在上面盖上布,保护自己的眼睛以免受伤。
  8、如果开机失败,首先检查电钻是否烧毁,应立即更换。
  9、工作中或完工时清洗机体,切忌将水喷湿电钻或电箱,以免损坏。
  10、每天工作完毕,应将料斗清理干净,管道,喷嘴,喷咀及旋转接头,必须清理彻底,有利于明天工作
  11、如果经一段长时间工作,察觉涂料出口没力,便要更换压力泵浦。
  12、在工作中突然不送料,而电机还在工作,证明喷嘴已塞孔,应立即停机清洗喷咀,然后再继续工作。
   13、喷咀是一损件(包括换压力泵浦)标准喷孔是4mm,而喷孔雾化不理想时,要立即更换喷咀。

 

 

 

Concrete operating rules for mortar spraying machine:
1, starting with the first water into the hopper, the speed adjustment to the middle and high speed, so as to achieve the effect of running the wet pipe.
2, the uniform mixing of the materials into the hopper, and then the pipe and the nozzle and the spray outlet locking machine.
3, before the injection, the Phoenix pump to 6kg pressure (0.26-0.36m) and then pick up the nozzle.
4, connected to the power, the muzzle of the hopper, adjust the air pressure and speed, in order to achieve the best atomization status, the wind is not stopped.
5, after the commissioning is accurate, the nozzle and the nozzle immediately moved to the construction site.
6, construction process, the pipeline is full of paint, not suitable for downtime, if the power failure, should immediately remove the pipe cleaning.
7, if the tube is filled with pressure, remove the tube before cleaning, must be covered with cloth, to protect their eyes to avoid injury.
8, if the boot failure, first check whether the drill down, should be replaced immediately.
9, work or finished cleaning the body, avoid water jet wet electric drill or electric box, so as to avoid damage.
10, the daily work is completed, should be cleaned, pipe, pipe, nozzle, nozzle and rotary joints, must be cleaned thoroughly, is conducive to work tomorrow
11, if after a long time to work, to detect the export of paint, it is to replace the pressure pump.
12, at work suddenly do not send materials, and the motor is still working that nozzle hole, should immediately stop cleaning nozzle, then come back to work.
13, the nozzle is a part of the damage (including the pump) standard spray hole is 4mm, and the nozzle hole is not ideal, to immediately replace the nozzle.

上一产品: 细石泵ZL22-10型
下一产品: 柴动力自行走式混凝土输送泵

相关产品介绍

柱塞式砂浆喷涂机
柱塞式砂浆喷涂机
打点拉毛喷涂机
打点拉毛喷涂机
砂浆喷涂机
砂浆喷涂机
砂浆喷涂机
砂浆喷涂机
无气喷涂机
无气喷涂机

关于我们| 资质证书 | 留言反馈 | 联系我们 | 网站地图

Copyright © 2013. www.zeliangjixie.com All Rights Reserved 版权所有 邢台市乐众机械制造有限公司
地址:河北省邢台市任县西黄工业区 电话:0319-7588597  13722935900(郭经理) 传真:0319-7588597

赛富通邢台运营中心【邢台智睿网络】 提供技术支持